| Blade Spindles |
No maintenance, sealed and
non-greasable spindles;
7.30"-diameter cutter housing
contains 17mm (.67")
diameter spindle shaft
and hex blade drive.
|
| Drive Tires |
23 x 9.5-12 Super Turf |
| Tractor Frame |
Unibody, welded, heavy-duty
2" X 3" rectangular tubular steel.
|
| Steering Control |
Hydraulically dampened twin
levers adjustable both fore
and aft. Also has 2-position
height adjustment.
|
| Front Caster Tires |
13 x 6.5-6, smooth tread, pneumatic.
Caged Roller Bearings (126-3289)
|
| Parking Brake |
Lever-actuated pawl brake. |
| Seat |
Deluxe suspension
(adjustable spring suspension)
seat with high back, molded
foam flip-up armrests, and
integral safety switch
|
| Electrical |
12-volt battery with 15-amp alternator. |
| Standard Features |
Engine hour meter, cup holder,
tow hitch and jack receiver
|
| UPC |
193308215754 |
| Engine Brand |
Kawasaki |
| Engine Model |
FX691V |
| Engine Displacement |
V-Twin |
| Engine Series |
V-Twin |
| Fuel System |
Carbureted |
| Engine Speed |
3700 rpm |
| Air Filter |
Cyclonic Air Cleaner |
| Fuel Type |
Gas Carbureted |
| Fuel Capacity |
7-gallon (26.5-L) single fuel tank
with single fill location.
|
| Fuel Indicator |
Translucent Visual |
| Drive |
Hydro-Drive |
| Drive Description |
Dual Hydro Gear ZT3100,
hydrostatic transmission with
charge pumps, relief valves and
independent, replaceable filters.
|
| Speed |
Infinitely variable speed selection
from 0–9.0 mph (14.5 kmph)
forward, 0–5.0 mph (8.0 kmph) reverse.
|
| Carb Compliant |
No |
| Deck Lift |
Standard; foot-controlled deck
lift changes cutting height and
lifts the deck to maneuver around
obstacles, or place in transport position.
|
| Safety Package |
Operator Presence Controls (OPC)
and drive system interlock, with
safety interlock system indicators.
|
| ROPS |
2-post foldable ROPS standard with
seat belt and latch.
|
| PTO Engagement |
MagStop electromagnetic
125-ft-lb clutch
|
| Drive Wheel Release |
Allows unit movement without
engine running.
|
| Casters |
.375" thick caster yoke arms |
| Engine Spec |
_S25 |
| Width / Cutting Deck |
52" |
| Deck Style |
Floating Deck |
| Deck Style Description |
Full-floating UltraCut Series 3.
Side discharge standard, with
molded discharge chute and
option to bag or mulch.
|
| Deck Construction |
10-gauge high strength alloy top
that is formed and continuously
seam welded, with 7-gauge side skirt.
|
| Blade Tip Speed |
Approximately 18,500 fpm. |
| Cutting Heights |
1.5" (3.8 cm) to 5.0" (12.7 cm) in
0.25" (.6 cm) increments, adjustable
from operator's seat.
|
| Blades |
3 Blades at 18.00" Length |
