| No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17m (.67") diameter spindle shaft. |
| 20 x 10.0-10 Turf Tech TL |
| Unibody, riveted 10-guage steel. |
| Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| 13 x 6.5-5 smooth-tread, pneumatic. |
| Automatic-actuated pawl brake. |
| Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position. |
| 12 volt battery with 15-amp alternator |
| Engine hour meter, cup holder and hitch |
| |
| |
| |
| |
| |
| |
| |
| Standard Engine Manufacturer's air filter |
| |
| 3-gallon (11.0-L), single fuel tank with single fill locations |
| |
| |
| Two Hydro-Gear ZT-2200 hydro static transmissions with no hoses and integrated cooling fans and integrated reservoir |
| Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–5.0 mph (8.0 kmph) reverse. |
| |
| Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Operator Presence Controls (OPC) and drive system interlock. |
| Optional Rigid ROPS with seat belt and latch. |
| Electromagnetic 105-ft-lb clutch |
| Allows unit movement without engine running. |
| .25" thick caster yoke arms. |
| |
| |
| |
| Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch. |
| 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 4 point suspension. |
| Approximately 18,500 fpm. |
| 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. |
| 3 Blades at 18.75" Length |
.png)
