|
| No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive. |
| |
| 13 x 6.5-6, smooth tread, pneumatic. Bushings |
| .375" thick caster yoke arms |
| Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. |
| Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Lever-actuated pawl brake. |
| High back seat with foam padded seat cushion, armrests and integral safety switch |
| 12-volt battery with 15-amp alternator. |
| Engine hour meter, cup holder, tow hitch and jack receiver |
| |
|
| |
| |
| |
| |
| |
| |
| Standard Engine Manufacturer's air filter |
| |
| 7-gallon (26.5-L) single fuel tank with single fill location. |
| |
| |
| Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
| Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. |
| |
| Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| 2-post foldable ROPS standard with seat belt and latch. |
| MagStop electromagnetic 125-ft-lb clutch |
| Allows unit movement without engine running. |
| |
|
| |
| |
| Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Approximately 18,500 fpm. |
| 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
| 3 Blades at 20.50" Length |
|
| |
| |
| |
| |
.png)
