Blade Spindles |
No maintenance, sealed and
non-greasable spindles;
7.75"-diameter cutter housing
with 25mm (.98") diameter
spindle shaft and
splined blade driver.
|
Drive Tires |
23 x 9.50-12, 4 ply Super Turf® |
Tractor Frame |
Unibody, welded, heavy-duty
1.5" x 3" tubular steel.
|
Steering Control |
Hydraulically dampened twin
levers, adjust fore and aft.
Adjustable dampeners (3 positions)
to customize drive
responsiveness. Also
adjustable to 2 height positions.
|
Front Caster Tires |
13 x 5.0-6, smooth-tread,
semi-pneumatic.
|
Parking Brake |
Lever-actuated disc brake. |
Seat |
Deluxe, bolstered suspension seat
with Elastomeric Vibration
Control material. Adjustment:
Fore and aft from Operators’ Position.
|
Electrical |
12-volt battery with 15-amp alternator. |
Standard Features |
Engine hour meter and cup holder |
UPC |
193308000473 |
Engine Brand |
Kawasaki |
Engine Model |
FX751V |
Engine Displacement |
852 |
Engine Series |
V-Twin |
Engine Speed |
3,750 RPM |
Air Filter |
Heavy-duty canister air filtration
system
|
Fuel Type |
Gas Carbureted |
Fuel Capacity |
8-gallon (30.3-L) single fuel tank
with single fill location.
|
Fuel Indicator |
Yes - electronic Sender |
Drive |
Hydro-Drive |
Drive Description |
Two Exmark exclusive Parker
unitized pump and wheel motor
systems with no hoses,
1.7-quart integrated reservoir,
spin-on filter and heavy-duty
components. 12 cc pumps
and 14. 5 cubic inch motors.
|
Speed |
Infinitely variable speed selection
from 0–8.0 mph (12.9 kmph)
forward, 0–5.0 mph (8.1 kmph) reverse.
|
Carb Compliant |
Yes |
Deck Lift |
Standard; foot-controlled deck lift
changes cutting height and lifts
the deck to maneuver around
obstacles, or place in transport position.
|
Safety Package |
Operator Presence Controls (OPC)
and drive system interlock,
with safety interlock system indicators.
|
ROPS |
2-post foldable ROPS standard
with seat belt and latch.
|
PTO Engagement |
MagStop electromagnetic
175-ft-lb clutch with spot brake
|
Drive Wheel Release |
Allows unit movement without
engine running.
|
Casters |
.50" thick caster yoke arms. |
Engine Spec |
AS11 |
Width / Cutting Deck |
52" |
Deck Style |
Floating Deck |
Deck Style Description |
Full-floating UltraCut Series 4.
Side discharge standard, with
molded discharge chute and
option to bag or mulch.
|
Deck Construction |
10-gauge top that is formed and
continuously seam welded, 7-gauge
side skirt and 7-gauge reinforced
spindle mounting locations for
improved strength and reduced weight.
|
Blade Tip Speed |
Approximately 18,500 fpm. |
Cutting Heights |
1.0" (2.5 cm) to 5.5" (11.8 cm) in
0.25" (0.64 cm) increments
adjustable from operator’s seat.
|
Blades |
3 Blades at 18.00" Length |